AVS Bugflector Instrucciones De Instalación

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
1
Installation Instructions
®
- Bugflector II
Clean Towel 10 mm socket wrench
NOTE: Actual application may vary slightly from illustrations.
Raise hood.
® ®
- Carflector - Chrome Hood Shield
Screw Washer
x2
Locate (2) circular holes on the underside of hood. Clean the area
2
Page 1 of 3
I - Sheet Number BF66 Rev. C
Well
x2 Nut x2
Measuring Tape
around these with a soft cloth.
™
Bump On
x4
Phillips
screwdriver