Uline H-7193 Manual De Instrucciones
Uline H-7193 Manual De Instrucciones

Uline H-7193 Manual De Instrucciones

Ocultar thumbs Ver también para H-7193:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

H-7193
FUEL TRANSFER PUMP
TOOLS NEEDED
10 mm Wrench
Adjustable Wrench
Pump and Motor Assembly
Hose
1.
Wrap PTFE tape around the male threads of the
elbow, hose end fitting and suction tube to ensure a
leakproof connection.
2. Unscrew nut and attach on/off switch. (See Figure 1)
3. Using a 10 mm wrench, remove the two bolts above
the on/off switch and reattach along with the nozzle
holder. (See Figure 1)
Figure 1
PAGE 1 OF 9
1-800-295-5510
uline.com
PARTS
Nozzle Holder
On/Off Switch
Wire Connecting
Nozzle
Adapter
ASSEMBLY
On/Off Switch
Nozzle Holder
Elbow
Power Cord
4. Hand tighten elbow onto pump outlet. Once no
longer able to hand tighten, use a wrench for 1/2
of an additional turn. (See Figure 2)
Figure 2
5. Fasten bung nut onto 2" opening of drum or tank.
(See Figure 3)
Figure 3
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Suction Tube
PTFE Tape
Bung Nut
Elbow
Bung Nut
0621 IH-7193
Tabla de contenido
loading

Resumen de contenidos para Uline H-7193

  • Página 4: Bomba Para Transferir Combustibles

    H-7193 800-295-5510 uline.mx BOMBA PARA TRANSFERIR COMBUSTIBLES HERRAMIENTAS NECESARIAS Llave de 10 mm Llave Ajustable PARTES Interruptor Portaboquilla Codo Tubo de Succión Ensamble de Bomba y Motor Encendido/Apagado Cinta de PTFE Tapón Adaptador de Cable Manguera Boquilla Roscado Cable de Conexión...
  • Página 5: Continuación De Ensamble

    CONTINUACIÓN DE ENSAMBLE 6. Conecte las dos mitades del tubo de succión. 10. Coloque el otro extremo de la manguera en la (Vea Diagrama 4) boquilla para combustible. Apriete con la llave ajustable. (Vea Diagrama 8) Diagrama 4 NOTA: Solo utilice la parte superior del tubo de succión para tambos o tanques más bajos.
  • Página 6: Preparación

    Gasolina, Diésel, Combustible E15, Queroseno, Bio Diésel (B20) riesgo de daños mecánicos, como el uso de cables con el recubrimiento adecuado. ULINE 12575 Uline Drive NOTA: El motor se debe conectar con un cable con conexión a tierra o conductor de unión Pleasant Prairie, WI 53158 equipotencial.

Tabla de contenido