Cequent Performance Products PRO Serie Manual De Instrucciones

DESCRIPTION
2" Shank Assembly
Side Tube - Short
Center Tube - Long
5/16-18 x 2.25 Carriage Bolt
5/16-18 Hex Lock Nut
Bail Pin
5/8-11 Anti-Rattle Pin
5/8" Flat Washer
LH Wheel Cradle Assembly
RH Wheel Cradle Assembly
Assembly Instructions:
1. Attach the (2) side tubes (short) to 2" shank assembly using the 5/16-18 x 2.25" carriage bolts and 5/16" lock nuts provided.
2. Attach the vertical center tube to 2" shank assembly using one 5/16-18 x 2.25" carriage bolt and 5/16" lock nut provided
Important Note: Tighten lock nuts so the support tubes still swing freely – see figure 2. There must be 1 – 2 threads of bolt
past end of lock nuts.
3. Rotate side tubes to the horizontal position as illustrated. Align holes in plates and side tubes and secure tubes in position
with bail pins as shown (Figure 1).
4. Rotate center tube to the vertical position as illustrated. Align holes in u-shaped bracket and tube and secure in position with
bail pin as shown.
Center Tube (Long)
Bail Pin
5/16" Carriage Bolt
(3) Places
Bail Pin
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Kit Contents:
QTY.
1
2
1
3
3
3
1
1
4
4
5/8" Anti-Rattle Pin
Side Tube (Short)
(2) Places
FIGURE 1.
ITEM: 63138
DESCRIPTION: Q-Slot 4 Bike Rack
DESCRIPTION
Support Tube Assembly
1-1/4" Shank
3/8-16 x 2.0 Carriage Bolt
3/8-16 Hex Lock Nut
1/2-13 Anti-Rattle Pin
1/2" Flat Washer
Wrench 3/4 , 1-1/16
Spring Clip
Frame Hook Assembly – Long
Frame Hook Assembly – Short
2" Shank Assembly
5/16" Lock Nut
(3) Places
Label side up
Page 1 of 15
QTY.
TOOLS REQUIRED:
1
½" Wrench
1 9/16 Wrench
2
2
1
1
1
2
2
2
5/8" Flat Washer
2" Hitch
Pin Clip
Important:
1 – 2 Threads
Minimum
FIGURE 2.
63138N Rev D 6-29-12
Printed in China