Kohler CLR2026FW Manual De Instalación

General Notes
1. This cabinet is designed to mount into 14" wide x 18"
high to 24" high wall openings, 4" deep.
2. The wall opening should be framed with studs 16" on
center to match the cabinet screw holes.
3. The cabinet accessories mount in the cabinet in both
left or right door hand configurations.
4. If you have purchased the optional CLL20TW Light kit
refer to the instructions supplied for layout and wiring.
5. You will need to use the light fixture spacer when
using the CLL20TW Light kit supplied with light.
6. Call our customer service number shown on right
between 8 and 5 E.S.T. if you have any questions or
require parts.
Limited Warranty One Year Term
ROBERN warrants to the original purchaser that, it will, at its elec-
tion repair, replace, or make appropriate adjustment to products
made by this company shown to have significant defects in mate-
rial or workmanship which are reported to ROBERN in writing
within one (1) year from the date of delivery. ROBERN is not
responsible for installation costs.
The warranty is void in the event the product is damaged in transit,
or if damage or failure is caused by abuse, misuse, abnormal
usage, faulty installation, damage in an accident, improper mainte-
nance, or any repairs other than those authorized by ROBERN.
At the expiration of the one year warranty period, ROBERN shall
be under no further obligation under any warranty, expressed or
implied, including the implied warranty of merchantability.
ROBERN shall not be liable for any consequential damages aris-
ing out of or in connection with the use or performance of its
products. Some states do not allow limitations on how long an
implied warranty lasts or do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Any liability against ROBERN under any implied warranty, includ-
ing the warranty of merchantability, is expressly limited to the
terms of this warranty. Permission to return any merchandise
under this warranty must be authorized by ROBERN and returned
prepaid by the purchaser. Claims under this warranty should be
sent directly to your dealer.
CLR Recess Inst. SS422
09/02 Rev. 9 cabfax #0422
CLR2026FW RECESS CABINET
Part List – CLR Recess Cabinet
1. Cabinet Body
(REPBOXCLR)
2. Door
(DXCLC20FW)
3. Glass Shelves
– Shelves
(SHLFCLR20)
4. Hardware Bag • BAGLRW • Contains the Following
A. Screw Caps (SS341)
B. Door Bumpers (SS340)
C. #8 x 1 1/2" Phillips head screws (SS328)
D. Toothbrush covers (SS262)
E. Hinges (SS259)
F. Hinge Mount Screws (SS829)
G. 4 Hinge Door Screw (SS679)
1
701 N. Wilson Ave.
Bristol, PA 19007
800.877.2376
SS422 CLR RECESS CABINET