Telwin TW 9000 Manual Del Usuario

MANUALE
ISTRUZIONE
TELWIN S.p.A.
Via della Tecnica, 3 - 36030 VILLAVERLA (Vicenza) Italy
Informative note on the Model TW 9000 + TW 602 self-darkening filter, TW 9000 + TW 801 self-darkening filter, TW 9000 + TW 521 self-
darkening filter.
Note: the terms helmet and filter are used in the text that follows.
The helmet model TW 9000 is in compliance with the EN 175:1997 European Standard; the filters model TW 602, TW801 and TW 521 are
in compliance with the EN 379:2009 European Standard (Personal eye protection - Automatic welding filters) and with what is prescribed
by regulation (EU) 2016/425.
TECHNICAL SPECIFICATIONS OF FILTERS TW 602, TW 801, TW 521
- Overall dimensions:
- Cover plates:
- Visual area:
- Luminous state:
- Dark state:
- Protection from UV/IR :
- Sensitivity:
- Delay:
- Switching time:
- Delay from dark state to luminous:
- Switch on / switch off:
- Light sensors:
- Power supply:
- Operating temperature:
- Preservation temperature:
- Structure:
WARNING!
• Helmet users must read, learn and respect the basic rules given in this manual.
• The radiation emitted by the electric arc during welding can damage the eyes and burn the skin. In addition, welding produces sparks
and drops of molten metal that fly in all directions. The protective helmet must be worn to avoid potentially serious physical damages.
• Do not, for any reason, set fire to the welding helmet because the smoke it produces will damage the eyes and body if inhaled.
• The material used to make the whole helmet does not endanger people or the environment.
• Regularly check the conditions of the helmet:
- Before using it, make sure that the filter-glass is in the correct position and correctly fixed in place: it must be exactly in the space
described.
- Keep the helmet away from flames.
- The helmet must not be placed too close to the welding area.
- When welding for extended periods, occasionally check the helmet to make sure there are no signs of deformation or deterioration.
- Subjects with particularly sensitive skin must take extra care: materials that may come into contact with the skin can cause allergic
reactions.
• This self-darkening helmet is homologated only for protecting the face and eyes from ultraviolet and infrared radiation, from sparks and
welding sprays. It is not suitable for laser welding and oxy-acetylene welding and cutting or for protecting the face against explosions
or corrosive liquids.
• Only replace helmet parts with others that are specified in this manual. Non-observance of this regulation can expose the operator to
health risks.
• If the helmet does not darken or presents operation problems, refer to the TROUBLESHOOTING chapter; if the problem persists
immediately stop using the helmet and contact the person in charge or a distributor.
• Do not immerse the filter in water or other liquids; do not use solvents to clean the filter.
• Only use the helmet in temperatures of between: -5°C (+23°F) ÷ +55°C (+131°F).
• Only store the helmet in temperatures of between: -20°C (-4°F) ÷ +65°C (+149°F).
• Do not allow the filter to come into contact with liquid and dirt.
• Do not open the filter container.
• Never use the helmet without the internal and external cover plate protections.
(EN) ................pag. 1 (NL) ..............pag. 22
(IT) ..................pag. 4 (EL) ...............pag. 25
(FR) ................pag. 7 (RO) ..............pag. 28
(ES) ..............pag. 10 (SV) ..............pag. 31
(DE) ..............pag. 13 (CS) ..............pag. 34
(RU) ..............pag. 16 (HR-SR) ........pag. 37
(PT) ...............pag. 19 (PL) ...............pag. 40

(EN)

WELDER'S HELMET MANUAL
133x114x9mm (TW 602 - TW 801) - 110x90x8mm (TW 521)
front 114x134mm, inside 69.5x103.5mm (TW 602),
front 114x134mm, inside 96x104mm (TW 801),
front 114x134mm, inside 50x95mm (TW 521),
100x67mm (TW 602), 100x93mm (TW 801), 92x42mm (TW 521)
gradation 4 DIN
variable gradation 4/5 - 9 and 4/9 - 13 DIN
up to 13 DIN
adjustable
adjustable
0.1 ms
0.1 - 1 s with control knob
automatic
4 (TW 602 - TW 801), 2 (TW 521)
solar cell (TW 602 - TW 801 - TW 521) and replaceable lithium batteries
(2xCR2450 TW 602) - (2xCR2032 TW 801)
-5°C (+23°F)
+55°C (+131°F)
-20°C (-4°F)
+65°C (+149°F)
plastic
- 1 -
(FI) ................pag. 43 (ET) ...............pag. 64
(DA) ..............pag. 46 (LV) ...............pag. 67
(NO) ..............pag. 49
(BG) ..............pag. 70
(SL) ...............pag. 52 (AR) ..............pag. 73
(SK) ..............pag. 55
(HU) ..............pag. 58
(LT) ...............pag. 61
Cod.954711