Rola 59837 Instrucciones De Instalación

Remove End Support from Cross Bar.
Cut Under Cover Strip to desired length (as marked in Step 2)
using a blade. Slide Under Cover Strip into slot in End of
Cross Bar. (Fig 6) Be careful of sharp edges.
Assemble End Support back into the Cross Bar.
Place second piece of Undercover Strip into Cross Bar. (Fig 7)
www.rolaproducts.com
Please read these instructions thoroughly before commencing installation.
Fitment of Cross Bars to Vehicle
Fig 1
Fitting Instructions
Hyundai Santa Fe 2007 - on
Product Code Number:
Maximum Carrying Capacity:
Fig 3
17-3/4" (700mm) Min
Fig 6
End
Support
Strap
Cross
Bar
Cequent Towing Products - Plymouth, MI
Technical Service: (888)521-0510
59837N
Sheet 1 of 2
A
28/05/09
59837
132lb / 60kg
Fig 7
PRINTED IN AUSTRALIA