Metra 99-2022B Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR PART 99-2022B
Buick Regal 2011-up
(Not designed for NAV equipped vehicles. For vehicles without push-to-start button)
99-2022B, 99-2022BR
KIT FEATURES
• ISO DIN Head unit provision with pocket
• DDIN Head unit provisions
• Painted Black to match factory finish
• Painted Brown to match factory finish
KIT COMPONENTS
• A) Radio Trim Panel • B) Radio Brackets • C) Pocket • D) Climate Control Trim Ring • E) Climate Control
Trim Panel • F) Data Interface • G) Interface Harness • H) (2) #8 x 3/8" Pan-head Phillips screws
• I) (4) #8 x 3/8" Truss-head Phillips screws
A B
G
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-044
Antenna Adapter: • 40-EU55 - amplified antenna adapter (sold separately)
METRA. The World's best kits.
APPLICATIONS
C D
I
H
™ 1-800-221-0932
E F
metraonline.com
Table of Contents
Dash Disassembly
- Buick Regal 2011-up ............................................ 2
Kit Assembly
- Radio panel assembly .......................................... 3
- Climate control panel assembly ............................ 3
- ISO DIN head unit provisions ................................ 4
- DDIN head unit provisions .................................... 4
Interface Installation
- Interface Installation ..........................................5-7
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket Wrench
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION