MetalTech I-CISGR Consignes De Sécurité Et Instructions De Montage página 3

ASSEMBLY INSTRUCTIONS
NOTE
Two types of fastener device can be
supplied with this product:
Erect the scaffold by following the manufacturer instructions.
1
Install the first guardrail panel by inserting two corner pegs into sockets in scaffold sides braces
2
and secure with lock pins or bolts supplied. Verify that the guardrail is firmly fastened to the platform
and it cannot be lifted.
Repeat with the second guardrail panel.
Verify that the access doors swings inward over platform. Lock the access doors with the door latch.
3
3
1
2
Lock pin
QTY.
Guardrails
2
4 Lock pins OR bolts with nuts
Bolt with nut
ENGLISH
BOX CONTENTS
DESCRIPTION
3