Resumen de contenidos para Mooreco Essentials 91180
- Página 1 Essential Flipper Table Part Number: 91180, 91181, 91182, 91183, 91184, 91185 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSEMBLAJE INSTRUCTIONS DE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER UPDATED AS OF: 02/26/2018 1 of 8...
- Página 2 Parts Hardware A- (5x) M6 x 46mm Flat Head Screw B- (2x) 4mm x 12mm Pan Head Screw C- (8x) M6 x 12mm Pan Head Screw. (L+R) (4x) ASSEMBLY INSTRUCTIONS DO NOT THROW AWAY! (2x) (2x) INSTRUCCIONES DE ENSEMBLAJE NO LA TIRE (2x) INSTRUCTIONS DE MONTAGE NE PAS JETER...
-
Página 3: Care & Maintenance
WARNINGS AND DISCLAIMERS SPANISH TRANSLATION FRENCH TRANSLATION Review full assembly instructions and Previo a comenzar el proceso de Avant de commencer l’ assamblage check that all parts are present before ensamblaje favor revisar veuillez consulter instructions beginning assembly. Heavy or large instrucciones y asegurarse que cuenta con complètes et vérifier si vous avez toutes furniture may require multiple persons in... - Página 4 STEP 1 Screw the right leg (P5) to the top (P1) using 2 “A” screws. STEP 2 Slide the flipper bar (P2) into place on the leg. UPDATED AS OF: 02/26/2018 4 of 8...
- Página 5 STEP 3 Insert the right handed lever (P7) through the leg and into the flipper bar. Secure in place with 1 “C” screw. STEP 4 Install the left leg (P6) using 2 “A” screws. Be sure to set the flipper bar in place before tightening the screws.
- Página 6 STEP 5 Screw the crossbar into place with 2 “B” screws, 1 in each end, and 1 “A” screw in the middle. STEP 6 Insert the left handed lever (P7) through the leg and into the flipper bar. Secure in place with 1 “C” screw. UPDATED AS OF: 02/26/2018 6 of 8...
- Página 7 STEP 7 Attach the spring (P11) by inserting the hook end into the hole on the flipper bar, and screwing the loop end into the leg using 1 “C” screw. Repeat on the other side. STEP 8 Install the modesty panel (P4) by screwing it to the legs with 4 “C”...
- Página 8 STEP 9 Screw the 4 casters into the legs. Put both locking casters on the sitting side of the table. UPDATED AS OF: 02/26/2018 8 of 8...