Onkyo UDB-1 Manual De Instrucciones

EN FR ES
USB DAB Adapter
UDB-1
(CC0240)
This Advanced Manual has the specifications for this unit, and details about the operations, settings, etc., on the connected device.
General Specifications
Specifications and appearance are subject to change without prior notice.
Tuning Range
174.928 MHz – 239.200 MHz, Band III
Sensitivity
`98 dBm (Min)
Power Consumption
120 mA
Dimensions (WkHkD)
30 mma16 mma76.8 mm
Weight
22 g
USB Terminal
Ver. 2.0, Full Speed
Operations and settings on the connected device
∫ How to select input
Apart from pressing the TUNER button on the remote controller to select DAB, there are some other ways you can listen to DAB.
The way to select input depends on your device, but we will introduce some here.
0 Use the Input Selector button or dial on the remote controller or main unit which cycles through the inputs for the unit, and
display "DAB"
0 Select "NET" input and then select "USB" from a list
* "DAB" and "NET" inputs will not be available immediately after you start the connected device. It will become selectable when
the network function is started.
∫ Presetting stations for listening
The way to preset stations is the same as for the presetting of AM or FM stations on the connected device. See the pages for the
AM/FM radio in the instruction manual for the device connected. Select the preset stations with the left and right cursors on the
remote controller.
IT DE NL
– EN 1 –
SV RU AR
Advanced Manual
JP
繁中