MAAX 106687 OUTLOOK BASE 4836 Manual De Instrucciones

These guidelines are recommended by
Maax Bath Inc. (hereafter "MAAX") for
the proper installation of their product.
A careful review of these procedures
(and any referenced
before starting is important in avoiding
unnecessary problems resulting in an
improper assembly or installation.
NOTE: All drawings in this publication are
typical, and may appear different than the
actual items being installed. In addition,
optional items may be shown on the units
which may not have been ordered on the
unit being installed.
Outlook Shower Pans
106687 OUTLOOK BASE 4836
106630 OUTLOOK BASE 6030 C
106856 OUTLOOK BASE 6030 L/R
106631 OUTLOOK BASE 6036
106857 OUTLOOK BASE 6238
Special Notes to Installer
Ü It is the sole responsibility of the installer
to determine, prior to the installation, the
requirements necessary for compliance
publications)
with all codes involving the unit or the
installation!
ÜAll paperwork packaged with the unit and
any associated options or accessories
should be saved and presented to the
homeowner upon completion of the
installation!
ÜAll published unit dimensions are for
reference only. Any critical dimensions
required for installation should be taken
directly from the unit being installed!
ÜAny independent changes made to the
unit (or to any options and accessories
supplied with the unit) beyond those
required for normal installation can void
all warranties! (Refer to warranties for
further information.)
Inspection Guidelines
A careful check of the unit should be
conducted upon receipt. Notify your
supplier immediately if any questions or
problems are encountered during this
process.
DO NOT INSTALL ANY UNIT
WITHOUT FIRST ADDRESSING
QUESTIONS WHICH ARISE DURING
THE INSPECTION!
Basic Module Check
ü Check that the unit drain matches the
bathroom drain location.
ü Check for unit surface damage.
ü Check unit color for coordination to
other bathroom fixtures.
Options/Accessories Check
An individual check list is included with
the assembly and installation guidelines of
factory authorized options. Refer to listed
publications for further information before
continuing.