User's Guide
Features
The 3D glasses enable you to view 3D images. To view 3D images, you need both a pair of 3D glasses
and a Samsung 3D TV. SSG-3100GB enables
(Samsung 3D glasses cannot connect to other Bluetooth products.)
(Bluetooth)? Bluetooth is a short-distance radio communication technology
that uses the 2.45 GHz band used to connect various devices within a close distance.
Parts
Power Button
LED Indicator
Components
Button Battery
3D Active glasses
(CR2025)
Performing Bluetooth pairing
What is Pairing? It is a preparing process to share information with devices before
connecting.
For the initial pairing
1.
If the user takes the 3D glasses out of the box and briefly presses the power button, the glasses
are turned on and the pairing process is started automatically.
If the TV is turned off or there is no pairing signal, the 3D glasses transmit the pairing signal for
a few minutes and then the glasses return to their initial state.
2.
If the first attempt to pair fails, turn on the TV (2D or 3D) and press the Power button on the 3D
glasses. The 3D glasses will power on and there will be another attempt to pair.
Operating range
Turning the glasses on
Press the power button briefly.
The green LED is turned on for 3
seconds.
Turning the glasses off
Press the power button briefly.
The red LED is turned on for 3
seconds.
Performing the pairing
Suggested range
process.
While the pairing process is in
progress, the green LED blinks
Working distance
continuously. The green and red
Pairing distance
LEDs will blink for 2 seconds
when the pairing is complete.
To perform the pairing process again
1.
If a user presses and holds the power button on the 3D glasses for at least 2 seconds when it is
turned off, the power is turned on and the pairing process starts.
If the user presses and holds the power button of the 3D glasses for at least 2 seconds, the
pairing process starts.
The pairing process is attempted for 10 seconds. If the pairing process fails, the power is
turned off.
The maximum viewing distance may vary depending on obstacles (human body, metal, wall,
etc.) or electromagnetic wave near the 3D glasses.
Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, the battery
lifespan decreases.
connecting devices through (Bluetooth).
Battery Cover
Liquid crystal shutter
Cleaning cloth
6m
6m
50 cm or less
Replacing the Batteries
Red LED Blinks every two seconds continually, replace the Batteries with new ones.
viewing guidelines
•
If the 3D glasses are connected to the TV, the "3D glasses connected." message is
displayed on the TV.
•
When you watch 3D images under flickering lighting such as a fluorescent lamp (50Hz ~
60Hz) or a 3 wavelength lamp, you may notice a small amount of screen flickering.
If this occurs, dim or turn off the light.
•
If you change the channel or input mode while watching a 3D picture, the 3D glasses
may not work properly and the screen could be displayed abnormally for a few seconds
because the 3D function of the TV is turned off. In this case, the 3D glasses are
automatically turned off after a while.
•
If the 3D glasses move outside of the effective range of signal reception, the signal
from the TV will be disconnected and the display of the 3D glasses will turn off after 3
seconds. The 3D glasses will power off 30 seconds after the display turns off. When this
happens, the red LED will turn on for 3 seconds.
Under some circumstances, the 3D glasses may malfunction due to interference from
other devices.
•
Be sure to stay within the effective viewing distance when watching TV in 3D.
The pictures may not be viewable in 3D if you move outside of the effective viewing
distance for more than a few seconds.
•
If you lie on your side while watching TV with 3D active glasses, the picture may appear
dark or may not be visible.
•
The 3D glasses may not work properly due to interference from other 3D products or
electronic devices that operate on the 2.4Ghz frequency such as a microwave oven or
AP near the glasses or TV. If the 3D function malfunctions due to interference, please
make sure that other electronic or wireless communication devices are as far away from
the glasses and the TV as possible.
•
The 3D effect may be experienced differently depending on the viewer. You may not
notice the 3D effect at all if your eyes have very different prescriptions.
•
If a part of the 3D glasses or lenses is defective or damaged, it cannot be repaired and
should be exchanged. If the glasses are no longer working within the warranty period,
the glasses can be repaired for free. If the glasses have been damaged due to the fault
of the customer or the warranty period has expired, a new pair of glasses will have to be
purchased.
CAUTION
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D IMAGES. READ THE FOLLOWING
CAUTIONS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION.
•
Adults should frequently check on children who are using the 3D function. If there are any
complaints of tired eyes, headaches, dizziness or nausea, stop the child from viewing the 3D
TV and ensure that they rest.
•
Do not use the 3D glasses for other purposes such as general wear, sunglasses, protective
goggles, etc.
•
Some viewers may experience discomfort such as dizziness, nausea and headaches while
viewing 3D TV. If you experience any of these symptoms, stop viewing the 3D TV, remove the
3D glasses and rest for awhile.
•
Watching 3D pictures for an extended period of time may cause eye strain. If you experience
any eye strain, stop viewing the 3D TV, remove the 3D glasses and rest for awhile.
•
Do not use the 3D function or 3D glasses while walking or moving around. Using the 3D
function or 3D Active Glasses while moving around may result in injury from running into
objects, tripping, and/or falling.