Tripp-Lite CSHANDLEKIT2 Guia De Instalacion

Tripp-Lite CSHANDLEKIT2 Guia De Instalacion

Accesorio de ruedas y manija para estaciones de carga para tabletas y chromebook

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Caster and Handle Accessory for
Tablet/Chromebook
(Compatible with models: CSC16AC, CSCXB16AC, CSCXS16AC,
Parts List
WARNING!
Do not attempt to install casters with equipment inside the charging station cabinet. Remove all
electronic devices from the charging station cabinet before installing casters. Failure to heed this
warning may result in damage to the charging station and equipment or personal injury.
• Do not push the charging station from the side panels. Pushing from the side panels will cause a tipping hazard.
• When rolling the charging station on its casters, always push it from behind.
• A rolling charging station can cause personal injury and property damage if not properly supervised. If rolling the charging station down a
ramp is required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than 12%.
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
Installation Guide
CSHANDLEKIT2
CSC16USB, CSCXSB16USB, CSCXIS16USB)
Español 3 • Français 5 • Póññêèé 7
PROTECT YOUR INVESTMENT!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
Charging Stations
4 mm
Hex
Key
1
M6 x
x4
15 mm
Hex
Washer
Screw
x16
x12
M6 x 120 mm Hex Head Screw
x16
M6
Lock

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Tripp-Lite CSHANDLEKIT2

  • Página 3: Accesorio De Ruedas Y Manija Para Estaciones De Carga Para Tabletas Y Chromebook

    Guía de instalación CSHANDLEKIT2 Accesorio de Ruedas y Manija para Estaciones de Carga para Tabletas y Chromebook™ (Compatible con los modelos: CSC16AC, CSCXB16AC, CSCXS16AC, CSC16USB, CSCXSB16USB, CSCXIS16USB) English 1 • Français 5 • Póññêèé 7 Lista de Partes Tornillo Arandela Hexagonal de Presión...
  • Página 4: Ruedas De Instalación

    Ruedas de Instalación Instalación de la Manija El CSHANDLEKIT2 contiene cuatro ruedas giratorias con bloqueo y cuatro Para instalar el soporte de la manija, utilice la llave hexagonal de 4 montantes para las ruedas. Para instalar, use una llave (no incluida) mm incluida para colocar los tornillos hexagonales M6 x 15 mm en el para colocar a la estación de carga los tornillos de cabeza hexagonal...

Tabla de contenido