Cooper Lighting FAIL-SAFE CFA Instrucciones De Instalación

ADC140279 IS-083
Installation Instructions – CFA
Instructions d'installation - CFA
Instrucciones de instalación de la CFA
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
Safety: When using electrical equipment, basic safety
precautions should always be followed including the
following:
1. Do not mount near gas or electric heaters.
2. The use of accessory equipment not recommended
by the manufacturer may cause an unsafe condition.
INSTALLATION
Tools & Materials Required:
Adjustable Pliers
● ●
Wire Cutters/Strippers
● ●
Nut Driver - 11/32" Drive
● ●
Nut Driver - 5/16" Drive
● ●
(3) Wire Nuts or Crimp Connectors & Crimping Tool
● ●
(2) Mounting Screws (use appropriate size for use with
● ●
Clean Room T-Grid)
ITEM QTY. DESCRIPTION
A 1 Extruded Housing Assy.
B 1 Lens
C 1 Power Tray Assy.
D 2 Plug (.875" Dia.)
E 2 Plug (.156" Dia.)
F 2 Acorn Nut (8-32 x 5/16")
G 2 Lockwasher (#8)
H 1 Bushing (.875" Dia.)
I 2 Hex Nut (8-32 x 11/32")
3. Do not use this equipment for other than intended
use.
4. All servicing should be performed by qualified service
personnel.
WARNING
Risk of Electric Shock. Disconnect power before
installation.
Brand Logo
reversed out of
black
INS # INS # INS #