Movement BOLT PLATE LOADED HACK MACHINE Manual De Montaje página 26

MAINTENANCE
UPHOLSTERY
• To ensure prolonged upholstery life and proper hygiene, only wipe them with a damp cloth:
(soap and water or mild detergent) after each workout.
• Avoid using abrasive products or cleaners not intended for use on vinyl.
• Replace damaged upholstery immediately.
• Keep sharp or sharp objects away from upholstery.
STICKERS
• Periodically check all stikers
NUTS AND SCREWS
• Periodically check all nuts and bolts.
If necessary, retighten them, ensuring that all components are properly seated.
ANTI-SPLASH SURFACES:
• These surfaces are designed to provide secure bases and should be replaced if they wear or become slippery.
PAINTING
The equipment has additional protection in some parts using a special wax. To maintain a constant protection
of the equipment it is recommended to apply the product as described below:
• It is recommended to use TIRROIL WB 939 D wax (not
the equipment).
• Wear protective gloves and goggles
• Wipe the affected area with a damp cloth, allow to dry;
• With a soft brush, apply the wax covering the entire affected area. The wax, when applied on a dark surface,
may have a whitish coloration, which will disappear after drying.
• Redo the process every 3 months in the same way.
• Wax does not come with the
Parts where wax is applied in the equipment. for durability
use dry cloth on the highlighted parts.
11