Zircon ID Pro Guía Del Usario

Breaker ID Pro
Circuit Breaker Finder
Transmitter
Accessories
Visit www.zircon.com/support
for the most current instructions.
LIMITED 1 YEAR WARRANTY
1. EQUIPMENT RATINGS
Receiver
2. INSTALLING THE BATTERY
3. LOCATING A CIRCUIT
Note: A small percentage of circuit boxes are mounted
with breakers oriented vertically. See diagrams for
proper receiver orientation.
Breaker ID Pro Transmitter be used where the voltage across
the transmitter exceeds 277 V AC, as this will cause failure of
the device with consequent damage beyond repair.
Perform a second pass over the breakers.
4. CLEANING AND STORING THE UNIT
5. HELPFUL HINTS
In no event may the
Situation
YES NO
Probable Causes Solutions