Troubleshooting - Stil 6040 Consejos De Uso

TROUBLESHOOTING

Error message
CALIBRATION
The thermometer is initially calibrated at the time of manufacture. If the thermometer is used according to the use instruction, periodicread-
justment is not required. However, We recommends checking calibration every two years or whenever clinical accuracy of the thermometer
is in question. Please send the complete device to the dealers or manufacturer. The above recommendations do not supersede the legal
requirements. The user must always comply with legal requirements for the control of the measurement, functionality, and accuracy of the
device which are required by the scope of relevant laws, directives or ordinances where the device is used. A clinical summary and procedures
for checking calibration are available upon request.(Turn on the thermometer and press the power button long time until entering into calibrate
mode, software version will be displayed.
Problem
Measurement before thermometer is ready.
The ambient temperature is not within
the range between 10 °C and 40° C (50 °F ~ 104 °F).
The thermometer is placed incorrectly or unsteady.
The thermometer showing a rapid ambient
temperature change.
The thermometer is not functioning properly.
In Forehead mode: Temperature taken is higher than
43.0 °C (109.4 °F). In Object mode: Temperature taken
is higher than 100 °C (212 °F).
In Forehead mode:
Temperature taken is lower than 34.0 °C (93.2 °F).
In Object mode:
Temperature taken is lower than 0°C (32 °F).
The thermometer could not work due to low battery.
Solution
Take a measurement until
appears on the display.
Place the thermometer in a room for at least
30 minutes at room temperature between
10 °C and 40 °C (50 °F ~ 104 °F).
Read Illustration For Use thoroughly and take a new
temperature measurement.
Allow the thermometer to rest in a room for at least
30 minutes at room temperature:
between 10 °C and 40 °C (50 °F ~ 104 °F).
Unload the battery, wait for 1 minute and repower
it. If the message reappears, contact the retailer
for service.
Read Temperature Taking Hints Thoroughly, then take
a new temperature measurement.
Read Temperature Taking Hints Thoroughly, then take
a new temperature measurement.
Replace two new alkaline batteries size AAA.
or
17