Oxygenics Orbit Instrucciones Para La Instalación Fácil

O
rbit
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end of
shower arm.
WHAT'S INCLUDED
+
Rain Shower Head
+
Plumber's Tape
CHANGING
SPRAY
PATTERNS
Spray patterns may be
changed easily using
the switch located
on the orbital. Simply
move the easy spray
selector from side to side to
alternate spray patterns.
STEP 2
Remove any remnants of
old plumber's tape and
flush out shower pipe for
5 to 10 seconds.
STEP 4
In a clockwise direction,
screw your new shower
head onto the taped
portion of the shower arm.
Hand tighten only.
USING THE ORBITAL
The orbital can be rotated 360º
around the rain shower giving you
total coverage. Simply slide the orbital
clockwise until the desired position is
reached. The orbital's angle can also
be changed by gently tilting the unit
forward or back.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST