Tool Overview; Battery Information; Mechanical Characteristics; Usb Interface - Schrader EZ-sensor PAD Guía De Inicio

EZ-sensor PAD Manual

4. Tool overview

4.1

Battery information

4.2. Mechanical Characteristics

4.3. USB Interface

The EZ-sensor Pad is supplied with a USB connector that can be used for charging or
controlling the tool. Most computers have a USB interface.
The USB interface follows an international standard and is compliant with the USB 1.1
specification.
To check if your computer is compatible with this device, refer to the computer owner's
manual. The USB connector is intended to be used only with a computer. This shall not be
connected to smartphones, tablets, etc.
Battery type
Typical charging time
Battery life (full
charge)
Operating temperature 0 - 45°
Storage temperature
Silicon size
Connector
Li-ion/ Li-polymer
2h
Approx. 120 EZ-sen-
sor programming
operations
-10 - 55°C
1.2 x 7.4 x 2.6 cm
Micro-USB type B
English
P.12