Lutron Energi Savr Node Guia De Instalacion

Energi Savr Node
Please read this guide before installing.
Contents
Ratings and Model number overview ....................................1
Product overview..................................................................2
Wiring overview....................................................................2
Mounting ..............................................................................3
Control power wiring ............................................................3
EcoSystem Link wiring .........................................................4
Input group wiring ................................................................5
Contact closure inputs ..........................................................6
QS link wiring .......................................................................7
Applications .........................................................................9
Out of box functionality .........................................................9
System Programming Connection .......................................10
Troubleshooting ..................................................................11
Warranty ............................................................................12
Contact information ............................................................12
System Example
EcoSystem
Digital Links
(up to 64 ballasts each)
Control Power
120-277 V
Emergency Programmable
Contact Contact
Closure Closure
Input
Input
Energi Savr Node with EcoSystem
TM
English
with EcoSystem
TM
Page
Wired
Daylight
Sensors
(up to 4)
1
QS link
seeTouch QS Wallstation
®
Wired Daylight
Sensors (up to 4)
Wired Occupancy
Sensors (up to 4)
Wired EcoSystem
Wallstation or
IR receivers
OR
(up to 4)
Installation Guide
®
Español
|
Installation Guide
®
Control Panel Ratings
Control Power: 120-277 V
Output: 18 V 250 mA per EcoSystem link
Operating environment: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C)
Maximum humidity: 90% non-condensing
Thermal dissipation: 40 BTU/hr
Input Groups: 20 V 65 mA per group
QS link: 24 V 1 A 30 PDU (Power Draw Units)
Model number overview
QSN-1ECO-S Energi Savr Node with EcoSystem
QSN-2ECO-S Energi Savr Node with EcoSystem
QSN: Energi Savr Node
1: 1 EcoSystem Digital Link
2: 2 EcoSystem Digital Links
ECO: EcoSystem
S: Surface mount
Wired Wired EcoSystem
Occupancy Wallstation
Sensors or IR receivers
(up to 4) 1 (up to 4) 1
OR
Radio Powr Savr
Occupancy Sensor
(up to 10 per QSM)
Wireless
Communication
QSM
IR Transmitter
Note:
1 Up to 4 wired inputs total (of any type).
Français Português
50/60 Hz 0.5 A
IR Transmitter
Pico Wireless
TM ®
Controller (up to
10 per QSM)
Radio Powr Savr
Daylight Sensor (new!)
(up to 10 per QSM)
Lutron 1
|
®