Descargar Imprimir esta página

Tripp-Lite SRWALLSPPT12 Guia De Instalacion

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

90-Degree Wall Support Kit
The SRWALLSPPT12 / SRWALLSPPT18 90-Degree Wall Support Kit mounts to a wall surface to support
Parts List
Bracket (x1)
Assembly
1
2
The mounting surface must be able to safely support the
combined load of the equipment. Use appropriate fasteners
(not included) to secure the bracket to the wall. Use suitable
mounting means when installing to cinder block, concrete,
drywall or wood studs.
Installation Guide
Models: SRWALLSPPT12, SRWALLSPPT18
12-inch or 18-inch cable runway.
Español 2 • Français 3 • Русский 4
M8 J-Bolt (x2)
Tripp Lite
Wall Support Kit
SRWALLSPPT12
SRWALLSPPT18
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
M8 Lock Washer (x2)
Raceway Width
Measurement A
12" (300 mm)
14" (360 mm)
18" (460 mm)
20" (510 mm)
3
1
M8 Hex Nut (x2)
Measurement B
Measurement C
12.31" (313 mm)
10" (250 mm)
18.31" (465 mm)
16" (410 mm)
Cable Ladder Not Included
loading

Resumen de contenidos para Tripp-Lite SRWALLSPPT12

  • Página 2 Juego de Soporte de Pared a 90 Grados Modelos: SRWALLSPPT12, SRWALLSPPT18 Los Juegos de Soporte de Pared a 90 Grados SRWALLSPPT12 y SRWALLSPPT18 se instalan en una superficie de pared para sujetar una canaleta para cables de 300 mm o 460 mm [12" o 18"].

Este manual también es adecuado para:

Srwallsppt18