Descargar Imprimir esta página
HEIDENHAIN LS 4x7 Instrucciones De Sustitución
Ocultar thumbs Ver también para LS 4x7:

Publicidad

Enlaces rápidos

Replacing Instructions
Istruzioni per la sostituzione
LS 4x7
LS 4x7 C
4/2011

Publicidad

loading

Resumen de contenidos para HEIDENHAIN LS 4x7

  • Página 1 Replacing Instructions Istruzioni per la sostituzione LS 4x7 LS 4x7 C 4/2011...
  • Página 2 DIN EN 61340 – 5 – 1 DIN EN 61340 – 5 – 2 Maße in mm Dimensions in mm cotes en mm dimensioni in mm dimensiones en mm...
  • Página 3 Empfehlung: Recommendation: Open here to exchange the scanning unit Recommandation: Consiglio: Aprire qui per la sostituzione della testina Recomendación: Remove cable from Scanning unit Staccare il cavo dalla testina...
  • Página 4 LS 4x7 Reference mark Indici di riferimento...
  • Página 6 Check for defective sealing lips! Prestare attenzione alle guarnizioni difettose If the sealing lip is defective, dismount the second end section (see page 5) and remove the renmants of the sealant. In caso di guarnizione difettosa, smontare il secondo blocchetto terminale, vedi pagina 5, e rimuovere l’impermeabilizzante.
  • Página 8 Align the sealing lips outward Inserire le guarnizioni Fill the space between the closing edges of the sealing lips with grease Ingrassare le estremità delle guarnizioni...
  • Página 9 Push scanning unit in Inserire la testina LS 4x7 Reference mark Indici di riferimento...
  • Página 10 Loctite 222...
  • Página 11 Distanziale di montaggio/Distanziale di verifica Calibre de montaje/Calibre de verificación 3/2005 Mounting gauge for gap size Mounting Instructions Istruzioni di montaggio LS 4x7 Subject to change without notice Con riserva di modifiche 8/2006 Mounting Instructions Mounting Instructions Istruzioni di montaggio...
  • Página 12 Pay attention to the mounting orientation of the cable Prestare attenzione alla posizione di montaggio dell'uscita cavo 18±0.2 18.25±0.2...
  • Página 13 ML > 120: 80 ± 5 ML < 120: 40 ± 5 5 . 5...
  • Página 14 Mounting with Mounting Spar Montaggio con guida...
  • Página 16 DR. JOHANNES HEIDENHAIN GmbH 83301 Traunreut, Germany Technical support Measuring systems { TNC support NC programming PLC programming { Lathe controls www.heidenhain.de...

Este manual también es adecuado para:

Ls 4x7 c