Brizo MultiChoice T755 Serie Manual De Instrucciones
Ocultar thumbs Ver también para MultiChoice T755 Serie:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Write purchased model number here.
T755_______
T756_______
To order replacement parts and access additonal technical
documents and product info, visit www.brizo.com
Read all instructions prior to installation.
You may need:
CAUTION: This system/device must be set by the
installer to ensure safe, maximum temperature.
Any change in the setting may raise the discharge
temperature above the limit considered safe and
may lead to hot water burns.
NOTICE TO INSTALLER: CAUTION!–As the
installer of this valve, it is your responsibility
to properly INSTALL and ADJUST this valve
per the instructions given. This valve does
not automatically adjust for inlet temperature
changes, therefore, someone must make the
necessary temperature knob adjustments at
the time of installation and further adjustments
may be necessary due to seasonal water
temperature change. YOU MUST inform the
owner/user of this requirement by following the
instructions. If you or the owner/user are unsure
how to properly make these adjustments, please
refer to the section "Installation and Adjustment
of the Temperature Handle" and if still uncertain,
call us at 1-877-345-BRIZO (2749).
After installation and adjustment, you must affix
your name, company name and the date you
adjusted the temperature knob to the caution label
?
www.brizo.com
1-877-345-BRIZO (2749)
brizosupport@brizo.com
101687 Rev. B
MultiChoice
Thermostatic Valve Trim
with Diverter
3/32"
1/8"
(.23 cm)
(.32 cm)
provided and apply or attach the label to the back
side of the closest cabinet door and the warning
label to the water heater. Leave this Instruction
Sheet for the owner's/user's reference.
WARNING: This thermostatic bath valve is
designed to minimize the effects of outlet water
temperature changes due to inlet pressure
and temperature changes, commonly caused
by dishwashers, washing machines, toilets
and the like. There is a risk of hot water
burns and other personal injury when there
is a failure of other temperature controlling
devices elsewhere in the plumbing system if
the temperature knob is not properly set or if
the hot water temperature is changed after the
settings are made or if the water inlet changes
due to seasonal changes. To minimize this risk,
caution should be used when using the hot
water knob.
WARNING: Do not install a shut-off device on
either outlet of this valve. When this type of
device shuts off the water flow, it can defeat
the ability of the valve to balance the hot and
cold water pressures.
1
®
Rev. B
12/07/2018
Tabla de contenido
loading

Resumen de contenidos para Brizo MultiChoice T755 Serie

  • Página 7 Diverter Handle Reference Sheet Water Flow For 3 Function Diverter / Flujo de agua para Desviadores de 3 posiciones / Écoulement de l’eau pour les inverseurs à 3 positions 1st Position 3rd Position 2nd Position * 1 ª posición Outlet 1 2 ª...
  • Página 8 101687 Rev. B...
  • Página 9: Accesorios Para La Válvula Termostática Multichoice ® Con Desviador

    ADVERTENCIA: No instale un dispositivo seguro, llámenos al 1-877-345-BRIZO (2749). de cierre en cualquiera de las tuberías de salida de agua de esta válvula. Cuando este Después de la instalación y el ajuste, debe colocar...
  • Página 10: Garantía En Los Grifos Brizo

    (como descrito arriba) cualquier pieza o acabado que demuestre estar defectuosa en material y/o mano de obra bajo la instalación, el uso y el servicio normal. Si la reparación o el reemplazo no es práctico, Brizo Kitchen & Bath Company puede optar por reembolsarle el precio de compra a cambio de la devolución del producto.
  • Página 11: Instalación Del Cartucho

    Instalación de la Series 75 Instalación del cartucho Cierre los suministros de agua. Quite la tapa (1), las Gire el cartucho (1) para que la H (2) esté en el lado de tuercas tapas (2) y las tapas de prueba (3) del cuerpo de la entrada del agua caliente de la válvula.
  • Página 12: Instalación Del Cartucho De Desvío

    Instalación de la Series 75 Instalación del cartucho de desvío Instalación deslizable Deslice la tuerca tapa (1) sobre el casquillo PARA LA INSTALACIÓN DEL CARTUCHO DE desviador (2) y enrosque en el cuerpo de la DESVÍO: tubería preliminar. Aplique lubricante de silicona a la junta tórica (2) ATENCIÓN: Apretar demasiado puede provocar para facilitar la instalación del cartucho desviador daños a la propiedad o la falla del producto.
  • Página 13 Instalación de la Series 75 Instalación del accesorio Instalación de la chapa de cubierta Instalación de la mania para el volumen Para paredes de grosor hasta de 1 1/8". Fije la placa Instale la base de la manija para el control del trasera (1) al tubo prelimiar detrás de la pared (2) volumen (1) con la palanca señalando hacia usanso los 4 tornillos (3) proporcionados.
  • Página 14: Instalación Del Accesorio De La Válvula

    Instalación de la Series 75 Instalación del accesorio de la válvula ADVERTENCIA: Para minimizar el riesgo de quemaduras potenciales o lesiones por choque térmico debido al flujo cruzado, asegúrese de que la salida del agua de la regadera/ducha no esté bloqueada o restringida (por ejemplo, el control de pausa en el cabezal de regadera).
  • Página 15: Hoja De Referencia Para La Manija Desviadora

    Hoja de referencia para la manija desviadora Water Flow For 3 Function Diverter / Flujo de agua para Desviadores de 3 posiciones / Écoulement de l’eau pour les inverseurs à 3 positions 1st Position 3rd Position 2nd Position * 1 ª posición Outlet 1 2 ª...
  • Página 16 101687 Rev. B...
  • Página 23 Hoja de referencia para la manija desviadora Water Flow For 3 Function Diverter / Flujo de agua para Desviadores de 3 posiciones / Écoulement de l’eau pour les inverseurs à 3 positions 1st Position 3rd Position 2nd Position * 1 ª posición Outlet 1 2 ª...
  • Página 24 101687 Rev. B...

Este manual también es adecuado para:

Multichoice t756 serie

Tabla de contenido