Oki OkiLAN 6120i Guia De Inicio Rapido

The OkiLAN 6120i Print Server enables Ethernet network users to connect to a network-configured printer. It
supports 10/100-megabit networks, TCP/IP Direct Printing and Server-Based Printing.
Note: Before using the parallel port, you must remove the OkiLAN 6120i from the printer —see your
on-line OkiLAN User's Guide for instructions on how to do this.
Installing the OkiLAN 6120i
1. Turn off printer power.
2. Unplug the power cord.
3. Detach the interface cable from the rear of the printer.
4. Pry off the breakaway panel next to the interface connector with a screwdriver
5. Insert the OkiLAN 6120i by sliding it along the rails in the recess of the printer, until it is plugged
into the socket in the rear of the recess.
OkiLAN 6120i Installation
Breakaway panel
1