Axxess LC-GMRC-CL29 Instrucciones De Instalación

GM Class-2/LAN-29 Data Bus Interface
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Retains all warning chimes through an onboard speaker
• Can be used in analog amplified or non-amplified models, or when bypassing a factory amplifier
• Retains balance and fade
• LC-GMRC-CL29 interface • LD-GMRC01RCA harness • LD-LCLAN-01RCA harness
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
Axxess Integrate
Installation instructions for part LC-GMRC-CL29
LC-GMRC-CL29
2000-up
FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
APPLICATIONS
See inside front cover
axxessinterfaces.com
Connections to be made ..................................... 3-4
Installing the LC-GMRC-CL29.................................5
Initializing the LC-GMRC-CL29 ...............................5
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
•
metraonline.com
Table of Contents
From the LD-LCGMRC01RCA harness ................3
From the LD-LCLAN-01RCA harness .................4
All accessories, switches, climate controls panels, and
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION