Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

CAMSETW4 – BABY MONITORING SYSTEM WITH P/T CAMERA
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the CAMSETW4! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
2. Features
• Built-in 2.4GHz RF modules.
• Transmitting range: 50m (under ideal circumstances).
• Camera with IR LEDs and advanced CMOS module and audio function.
• 3 Channels Standard
3. Safety Instructions
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Always disconnect the device from the mains prior to cleaning or maintaining.
• Never replace damaged power cables. Instead, disconnect them from the mains and take the device to a qualified
technician.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
Do not plug in or disconnect the adapter with wet hands.
• Always disconnect the device from the mains during thunderstorms.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
4. General Guidelines
• The CAMSETW4 should only be used indoors with the included power adapter connected to an alternating
current of max. 110VAC / 60Hz or 240VAC / 50Hz.
• Observe the safety notices and operating instructions of all other appliances connected to the system.
• Do not operate the devices unsupervised.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
CAMSETW4
- 1 -
VELLEMAN
Tabla de contenido
loading

Resumen de contenidos para Velleman CAMSETW4

  • Página 12: Spécifications Techniques

    Si tiene dudas, contacte con las autoridades locales para residuos. ¡Gracias por haber comprado el CAMSETW4! Lea atentamente las instrucciones del manual antes de usarlo. Si el aparato ha sufrido algún daño en el transporte, no lo conecte a la red y póngase en contacto con su distribuidor.
  • Página 13: Instrucciones De Seguridad

    • Desconecte el aparato de la red durante una tormenta. • Los daños causados por modificaciones no autorizadas, no están cubiertos por la garantía. • Mantenga el CAMSETW4 lejos del alcance de personas no capacitadas y niños. 4. Normas generales •...
  • Página 14: Conexión

    4. Si quiere utilizar varias cámaras, seleccione una cámara en el canal 1 y otra cámara en el canal 2. Pase de una cámara a la otra al seleccionar el canal 1 ó 2 en el receptor. Observación: con esta configuración la cámara no puede explorar. CAMSETW4 - 14 - VELLEMAN...
  • Página 15: Limpieza Y Mantenimiento

    CMOS color 1/3” Píxeles 628 x 562 (PAL) o 510 x 492 (NTSC) Micrófono Mono Imagen Color (B/N si <6 Lux) Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso. CAMSETW4 - 15 - VELLEMAN...

Tabla de contenido