Field Controls ABA-1 Instrucciones De Uso

AIR BOOSTER ACTIVATOR
Read these instructions carefully prior to installation of this Air Booster Activator.
This kit is designed to be an optional component for use with the 24 VAC TM-90R
or TM-2000 Humidifiers and the 120 VAC Evenflow series of Air Boosters. The 24
VAC Humidifier application requires the use of a suitable length of 18 gauge two-
conductor thermostat wire. The 120 VAC Air Booster application requires wiring in
accordance to the National Electrical Code, NEC. (14 GA Romex or conduit cable)
I I :
TEMS NCLUDED
(1) Differential Air Pressure Switch
(1) Butt Splice
(1) Instruction Sheet
(1) Wire Clamp
NOTE: Wire is not provided with this kit. Read these instructions thoroughly to
determine which type of wire, and how much is required, prior to installation of this
kit.
PRODUCT QUESTIONS...
CALL FIELD FIRST
for answers on product maintenance,
operation or replacement part questions.
Phone: (252)522-3031
E-mail: fieldtec@fieldcontrols.com
Model: ABA-1
(1) ¼" O.D. Tube Clamp
(2) ¼" Female Quick Connect Terminal
(1) 5' x ¼" o.d. Aluminum Tubing
(6) 8-3/8" Sheet Metal Screws
English ....... Page 1
Français ..... Page 5
Espanõl ...... Page 8