Tripp-Lite C13 Manual De Instrucciones

Installation/Removal
These plug lock inserts are intended for use with C14 and C20 equipment plugs.
1
Place the plug lock insert over the
input end of a C14 or C20
equipment plug.
2
Securely connect the C14 or C20
equipment plug to a C13 or C19
power source.
3
To disconnect the equipment plug
from the power source, grip the
plug and plug lock tabs
A
simultaneously and then remove
them from the power source.
Save the plug lock insert as it is designed
for repeated use.
Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
13-02-234-93328D.indb 1
Instruction Sheet
C13 PLUG LOCK INSERT
C19 PLUG LOCK INSERT
B
Copyright © 2013 Tripp Lite. All rights reserved.
1
2
B
A
3
13-02-234 • 93-328D
3/25/2013 10:46:20 AM