LUND EX Bracket Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical
assistance or to obtain missing parts, please call Customer Service at 1-800-323-5863
Important Safety Information__
WARNING
CAUTION
Contents__
Tools Required_
Drill
Silicone
Center Punch
Installation Instructions
Lund EZ Bracket ™
• To be used with Lund branded products only.
• Do not stand on Lund running board or bracket while vehicle is in motion.
• Do not exceed 350lbs. weight on the Lund EZ bracket system.
• Do not use the Lund EZ bracket system as a jacking point for vehicle.
• Do not use Lund EZ bracket system or running boards to fasten cargo.
• Periodically check all components for tightness.
• Be sure to wear safety glasses while installing Lund EZ bracket system.
• When using power tools read and understand all operating instructions.
(6) Bracket
Extra washers are provided for alignment and are only to be used if needed.
7/16 Wrench
Marker
1/8" Drill Bit 1/4" Drill Bit
(12) Self Tapping
Screw
(6) ¼"-20 x 1
Hammer
Safety Glasses
1 of 4
KIT# 300001
I-10370
Rev. A
(12) Flat
washer
(6) ¼"-20
Ratchet
Level
3/8 and 7/16 Socket