Commissioning - Festo Egc-Fa Instrucciones De Utilizacion

EGC-FA
6

Commissioning

Warning
Unexpected movement of components.
Injury caused by impact or pinching.
• Ensure that there are the following precautions:
– Nobody can reach into the path of the moving
components (e.g. by providing a protective
guard).
– There are no foreign objects in the travel
range.
It should not be possible to touch the EGC until
the load has come to a complete standstill.
• Carry out commissioning by following the operating instructions for the drive axis
(e.g. EGC-...-BS/TB-KF-...).
Festo – EGC-FA – 1507a English
Fig. 7
21