Sunex Tools 8035 Manual Del Usuario

WARNINGS, ASSEMBLY INSTRUCTIONS & PARTS BREAKDOWN
Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact
and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact
Sunex Tools
read and discussed with the operator in the operator's native language by the purchaser/owner or his designee,
making sure that the operator comprehends its contents.
PARTS LIST
Examine box contents, then proceed with the following instructions.
Drawer
Assembly
Bottom Tray
Fixed Locking
Wheels (2) Casters (2)
WARNING
Read and follow all instructions in User's Manual. • Do not load carts beyond
rated capacity (450 lbs.) • Lock lid and drawers before moving. • Apply brake
on locking casters anytime cart is in place. • Units can tip or fall causing
damage or personal injury. • Cart is designed to roll easily on flat surfaces
and should not be used on uneven or inclined surfaces. • Do not open more
than one loaded drawer at a time. •Do not stand on or step in drawers. • Keep
children away from unit. • Wear gloves when lifting edges. • Failure to heed
these warnings may result in personal injury and/or property damage.
WARNING: This product can expose you to chemicals including nickel, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
8035 & 8035R
for replacements. If the operator is not fluent in English, the product and safety instructions shall be
®
M8 x 16
(16 pcs.)
M8 x 16
(32 pcs.)
M8 x 20
(4 pcs.)
EVA Liners (4)
1
MODEL 8035 / 8035R
SLIDE TOP UTILITY CART
M8 Nut
(16 pcs.)
M8 Washer
(64 pcs.)
Push Handle (1)
Rubber Mats (2) Barrel Keys
TOOLS NEEDED
Tabletop or
workbench*
Phillips
Screwdriver
Legs (4)
2 People
13mm
Wrench
06/11/18