Sunex Tools 4930A Instrucciones De Operación

Operating Instructions • Warning Information • Parts Break down
SPECIFICATIONS
CAPACITY
POWER LIFT
CLOSED HEIGHT
RAISED HEIGHT
BASE SIZE
SHIPPING WEIGHT
4930A/4950B
4930A-4950B_opman.indd 1
4930A 4950B
30 TON 50 TON
7.07" 7.07"
11.2" 11.79"
18.27" 18.86"
7.75" X 6" 8.75" X 7"
47.74 lbs 67.54 lbs
THIS OPERATING MANUAL
CONTAINS IMPORTANT
SAFETY INFORMATION. READ
CAREFULLY AND UNDERSTAND
ALL INFORMATION BEFORE
OPERATING TOOL. SAVE THIS
MANUAL FOR FUTURE USE.
THIS IS A LIFTING DEVICE ONLY. IMMEDIATELY AFTER LIFTING, SUPPORT THE
VEHICLE WITH APPROPRIATE MEANS.
DO NOT OVERLOAD. OVERLOADING CAN CAUSE DAMAGE TO OR FAILURE OF
THE JACK.
LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE
MANUFACTURER.
CENTER LOAD ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE
MANUFACTURER.
THIS JACK IS DESIGNED FOR USE ONLY ON HARD, LEVEL SURFACES CAPABLE
OF SUSTAINING THE LOAD. USE ON OTHER THAN HARD, LEVEL SURFACES CAN
RESULT IN JACK INSTABILITY AND POSSIBLE LOSS OF LOAD.
NO ALTERATIONS TO THE JACK SHALL BE MADE.
READ, STUDY AND UNDERSTAND THE INSTRUCTION MANUAL PACKED WITH
THIS JACK BEFORE OPERATING. FAILURE TO HEED THESE WARNINGS
MAY RESULT IN LOSS OF LOAD, DAMAGE TO THE JACK, AND/OR FAILURE
RESULTING IN PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
FOR YOUR SAFETY AND TO PREVENT INJURY:
The jack must be removed from service
immediately and inspected by a manufacturer's
repair facility if it is subjected to an abnormal
shock or load.
4930A & 4950B
30 TON
BOTTLE JACKS
1
Use Service Jack for
lifting purposes ONLY.
Always support
vehicle with
jack stands.
50 TON
© 2006 Sunex Tools © 2006 Sunex Tools
7/19/06
8/7/06 4:54:10 PM