Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

• Operating Instructions • Warning Information
S P E C I F I C A T I O N S
Capacity . . . . . . . . . . . . . . . . . . . . . 7,000 Lbs .
Low Height . . . . . . . . . . . . . . . . . . . . . . . . . 4"
High Height . . . . . . . . . . . . . . . . . . . . . 19-1/2"
Handle Length . . . . . . . . . . . . . . . . . . . . . . 50"
PLease reaD These insTrUcTiOns carefULLY. nOTe The safeTY insTrUcTiOns anD Warnings. Use The PrODUcT
cOrrecTLY anD WiTh care fOr The PUrPOse fOr Which iT is inTenDeD. faiLUre TO DO sO MaY caUse DaMage TO
PrOPerTY anD/Or seriOUs PersOnaL inJUrY. PLease keeP This insTrUcTiOn ManUaL safe fOr fUTUre Use.
Description
Model MFJ35B service jack is a self-contained device designed for lifting, but not
sustaining, a partial vehicular load. It consists of a frame with wheels and swivel
casters supporting a mechanism that actuates a pivoting lift arm equipped with a
saddle. It is designed for use by professional auto mechanics.
Inspection
Visual inspection should be made before each use of the jack, checking for
leaking hydraulic fluid and damaged, loose or missing parts. Each jack must
be inspected by a manufacturer's repair facility immediately, if subjected to
an abnormal load or shock. Any jack which appears to be damaged in any way,
is found to be badly worn, or operates abnormally MUST BE REMOVED FROM
SERVICE until necessary repairs are made by a manufacturer's authorized
repair facility. It is recommended that an annual inspection of the jack be made
by a manufacturer's authorized repair facility and that any defective parts,
decals or warning labels be replaced with manufacturer's specified parts.
A list of authorized repair facilities is available from the manufacturer.
MFJ35B
• Parts Breakdown
Overall Length . . . . . . . . . . . . . . . . . . . . . . . 28"
Overall Width . . . . . . . . . . . . . . . . . . . . . 14-1/2"
Shipping Weight . . . . . . . . . . . . . . . . . . 108 Lbs .
MFJ35B
This is a LifTing Device OnLY. DO nOT MOve Or DOLLY The
vehicLe WhiLe On The Jack. iMMeDiaTeLY afTer LifTing
sUPPOrT The vehicLe WiTh aPPrOPriaTe Means.
DO nOT OverLOaD. OverLOaDing can caUse DaMage TO
Or faiLUre Of The Jack.
LifT OnLY On areas Of The vehicLe as sPecifieD bY The
vehicLe ManUfacTUrer.
cenTer LOaD On saDDLe PriOr TO LifTing. Off-cenTer
LOaDs MaY caUse DaMage TO Jack, LOss Of LOaD, PrOPerTY
DaMage, PersOnaL Or faTaL inJUrY.
This Jack is DesigneD fOr Use OnLY On harD LeveL
sUrfaces caPabLe Of sUsTaining The LOaD. Use On
OTher Than harD LeveL sUrfaces can resULT in Jack
insTabiLiTY anD POssibLe LOss Of LOaD.
nO aLTeraTiOns TO The Jack shaLL be MaDe.
reaD, sTUDY anD UnDersTanD The OPeraTing ManUaL
PackeD WiTh This Jack befOre OPeraTing.
faiLUre TO heeD These Warnings MaY resULT in LOss
Of LOaD, DaMage TO Jack, anD/Or faiLUre resULTing in
PrOPerTY DaMage, PersOnaL Or faTaL inJUrY.
Copyright © Professional Tool Products, 2008. All rights reserved.
1
®
MFJ35B
3-1/2 TON
CAPACITY
SERVICE JACK
fOr YOUr safeTY anD
TO PrevenT inJUrY:
Use service Jack for
lifting purposes OnLY.
always support vehicle
with jack stands.
01/07/09
Tabla de contenido
loading

Resumen de contenidos para Matco Tools MFJ35B

  • Página 10: Descripción

    CAPACIDAD DE 3-1/2 TONELADAS El gato hidráulico de servicio Modelo MFJ35B es un dispositivo integral diseñado para elevar, mas no para soste er parcia mente la carga vehicular. Consiste de un armazón con ruedas y rodamientos giratorios que acciona como un brazo elevadoe de pivote y equipado con un soporte.
  • Página 11: Instrucciones Para El Funcionamiento

    El propietario y/o usuario es responsable de asegurarse que las etiquetas de advertencia y los manuales de instrucciones estén conservados legiblemente e intactos. Las etiquetas de reemplazo y la documentación están disponibles con el fabricante. MFJ35B 01/15/08...
  • Página 12: Guía De Mantenimiento Del Gato Hidráulico

    3. Quite el mango; lubrique el recipiente del mango y la punta del mango. (Use grasa blanca de litio para atomización solamente.) 4. Lubrique ambas rodajas posteriores, cojinetes, y ambas ruedas delanteras. (Use grasa blanca de litio para atomización solamente.) 5. apriete toda la ferretería accesible. MFJ35B 01/15/08...
  • Página 13: Garantía

    Devuelva el equipo o las partes a Matco Tools, o a un centro de servicio unidad que demuestra ser defectuosa en cuanto a material o mano de autorizado, con el flete prepagado.

Tabla de contenido