Sunex Tools 8043 Manual De Operación

OPERATING MANUAL
THIS OPERATING MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING
THIS TOOL. SAVE THIS MANUAL FOR FUTURE USE.
PARTS LIST
Examine box contents,
then proceed with the
following instructions.
ASSEMBLY INSTRUCTIONS
Step 1: Assembly
Insert an M8x21 bolt through the bolt holes, and
handle as shown. Tighten with 13mm wrench.
Repeat with all remaining holes on handle.
8043, 8043R & 8043BL
M8x21 Bolts (4)
Barrel Keys
Drawer Handle (1)
1
8043, 8043R & 8043BL
4 DRAWER, SLIDING TOP
HYBRID UTILITY CART
• Units can tip over or strike you.
• Maximum load capacity 500 lbs.
Sliding Top 75 lbs.
Top Drawer 50 lbs.
Second Drawer 75 lbs.
Third and Forth Drawers 150 lbs. each
• Apply brakes on locking casters when not moving.
• Move cart slowly when loaded.
Avoid cracks, holes and other floor irregularities.
• Do not pull on cart. Push from handle on end to move.
• Read instruction sheet.
• Improper moving or loading can cause injury.
TOOLS
NEEDED
13mm
Wrench
M8x21 Bolts
Rev. 05/17/10