Sunex Tools SX494 Manual De Instrucciones

Operating Instructions •
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Free Speed..................................700 RPM
Chuck Cap. ........................................ 1/2"
Air Inlet Size: ............................ 1/4" NPT
Rec. Air Hose Size........................3/8" I.D.
Avg. Air consumption....................... 4 CFM
SX494
SX494_manual_101905.indd 1
Warning Information • Parts Breakdown
SPECIFICATIONS
Sound Level .............................92.0 dB(A)
Rec. Air Pressure: ...........................90 PSI
Spindle Thread: ............................ 3/8"-24
Length: .......................................... 7-1/2"
Weight: .........................................4.5 Lbs.
1
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
SX494
1/2" D .
R
H D
EAVY UTY
R
EVERSIBLE
A D
IR RILL
/ K C
W EYLESS HUCK
Rev. 10/19/05
10/19/05 1:35:03 PM