Descargar Imprimir esta página

AbleNet 5100 Guia De Inicio Rapido

Conmutadores simples, dobles y múltiples
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Quickstart Guide:
Single, Dual and Multiple switches.
Activating a Single switch
After the single switch has been connected, press the
activation area to control the attached device.
Connecting a switch to a device
www.ablenetinc.com
Activating a Dual switch
After the dual switch has been connected, press either
activation area to control the attached device. Each side
will act as an individual switch.
Example shown: Press side "A" to navigate through choices and side
"B" to activate.
Note: Specific behaviors will vary by attached device. See manufac-
turer's documentation of the attached device for more information.
B
A
Single Switches
®
®
(Big Red
, Jelly Bean
, Buddy Button, et al.)
Plug a single switch into any switch-adapted device with a
standard mono 3.5mm switch jack.
Dual Switches
(Rocker, Pneumatic switch)
Plug a dual switch into any switch-adapted device with a
standard stereo 3.5mm switch jack.
Multiple Switches
(Star, Wafer, Penta, Mini Joystick, et al.)
Plug a multiple switch into any device with a compatible
9-pin port.
Note: For computer access a computer switch interface is
required. (sold separately)
Activating a Multiple switch
Center/Top
After the multiple switch has been connected, press any
activation area to control the attached device. Each
activation area will act as an individual switch.
Example shown: Press right side to navigate through choices and the
press the center or top (if using a joystick) to activate.
Note: Specific behaviors will vary by attached device. See manufac-
turer's documentation of the attached device for more information.
Right
loading

Resumen de contenidos para AbleNet 5100

  • Página 7 Guía de inicio rápido: Conexión de un interruptor a un dispositivo. Conmutadores simples, dobles y múltiples. Conmutadores simples (Big Red , Jelly Bean , Buddy Button, etc.) ® ® Conecte un conmutador simple a cualquier dispositivo adaptado con un conmutador, por medio de un conector mono estándar de 3,5 mm.
  • Página 8: Montaje

    Velcro de servicio al cliente de AbleNet para que le proporcione un ® número de autorización de devolución (RA#), así como el costo de la reparación, en el caso haberlo.