Descargar Imprimir esta página
TECHCON SYSTEMS TS350 Guia Del Usuario

TECHCON SYSTEMS TS350 Guia Del Usuario

Dosificadores de precisión

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

Techcon Systems
TS350 / 355
Precision Dispensers
User Guide
English, German, French, Italian and Spanish version
TS350 / 355
TS350 / 355
Präzsions-Dosiergeräte
Doseurs de
précision
Benutzerhandbuch
Guide de
l'utilisateur
Copyright © OK International
TS350 / 355
TS350 / 355
Dosatore di
Dosificadores de
precisione
precisión
Manuale dell'utente
Guía del usuario
CONTENTS
1.
Safety
.....................................................................2
2.
.........................................................3
3.
Specifications ......................................................................3
4.
.....................................................................4
5.
..........................................................5
6.
.........................................................5 - 6
7.
.........................................................7
8.
Maintenance .....................................................................8
9.
.....................................................................8
11. I/O Configuration and End of Cycle Switch ..................................9
SAFETY
1
1.1 Intended Use:
WARNING: Use of this equipment in ways other than those described in this User
Guide may result in injury to persons or damage to property. Use this equipment
only as described in this User Guide.
OK International cannot be responsible for injuries or damages resulting from
unintended applications of its equipment. Unintended uses may result form taking
the following actions:
• Making changes to equipment that has not been recommended in the User
Guide
• Using incompatible or damaged replacement parts
• Using unapproved accessories or auxiliary equipment
1.2 Safety Precautions:
• Do not operate this unit in excess of maximum ratings/settings
• Always wear appropriate personal protective clothing or apparel
• Use only the following power adaptor models: PSA15R-240P(ZJ) or
PW118RA2403B01, PW118RA2403H01, PW118RA2403M01,
PW118RA2403G01
• Care must be taken to prevent the ingress of corrosive or flammable fluid back
into the unit. If corrosive or flammable fluids are used, an inline filter (881-
000-000) must be installed on the dispenser to help prevent the fluids from
being sucked back into the unit
• The fluid being dispensed may be toxic and/or hazardous. Refer to Material
Safety Data Sheet for proper handling and safety precautions
• If a piston is not used with the barrel, an inline filter (881-000-000) must be
installed on the receiver head to help prevent fluids from being sucked back
into the unit. Also do not overfill the barrel and to lay the barrel on its side
• Do not smoke or use open flame when flammable materials are being dispensed
Page Number
.............................................8
2

Publicidad

loading

Resumen de contenidos para TECHCON SYSTEMS TS350

  • Página 18: Seguridad

    40°C (104°F) • Utilice en todo momento la ropa y el equipo de protección personal apropiados TS350 = 0-100 psi (0-6,9 barios) Salida de aire • Utilice únicamente los siguientes modelos de adaptador de corriente: PSA15R-...
  • Página 19: Características

    CARACTERÍSTICAS CONEXIÓN DE LA UNIDAD PRECAUCIÓN: Debe instalarse un filtro de 5 micras (TSD800-6), No Incluido, con la unidad para garantizar un filtrado correcto del aire. Figura 2.0 Elementos Descripción Figura 1.0 A la fuente de aire Filtro de aire (No Incluido) Adaptador de corriente Elementos Descripción...
  • Página 20: Configuración Del Ciclo De Dosificación Automática

    1. Presiones el botón de re-encendido (3) hasta que la letra “P” este Pueden almacenarse hasta diez disparos individuales o en secuencia en el tintineando. TS350/TS355. 2. Gire la perilla de control de programación (8) para seleccionar el 1. Siga los pasos indicados en la sección “6.2 Configuración del ciclo de programa deseado.
  • Página 21: Solución De Problemas

    Evite conectar el suministro de aire si se superan los 100 psi (6,9 barios) • Interruptor de pedal con fallas • El interruptor de pedal para el TS350 y los 15 psi (1,03 barios) para el TS355. requiere reparación o hay que Utilice únicamente alcohol amílico para limpiar la superficie exterior de la reemplazarlo cubierta principal.
  • Página 22: Configuración De E/S E Interruptor De Fin De Ciclo

    Durante el ciclo de dispensado, el pin 3 será aterrizado. Por favor asegúrese que el dispositivo externo (su máquina que controla el controlador del dispensador) tenga la misma tierra que el controlador TS350/355. Pin 1 (+) Para iniciar el ciclo de dispensado con voltaje Pin 2 (-) Retroalimentación de Fin de Ciclo...

Este manual también es adecuado para:

Ts355