Portfolio LSR8BX Serie Instrucciones De Instalación

IL520016ML
Installation Instructions – LSR8BX* Commercial LED
Rough-In
Instructions d'installation –* Nécessaire d'installation brute pour
DEL commerciale LSR8BX
Instrucciones de instalación de la luminaria LED de uso comercial
LSR8BX* para áreas ocultas
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Fire! Do not install insulation within 3 inches
(76 mm) of any part of the luminaire fixture or in a
way that may entrap heat.
WARNING
Installation and servicing to be performed only
by qualified personnel, If not qualified, consult an
electrician.
WARNING
Do not energize the LED Engine until the protective
covering has been removed and the lower trim
properly installed.
This fixture should be supported by main runners or
N otee:
other structure that is capable of supporting fixture
weight of 40 Ibs.
SAFETY: When using electrical equipment, basic safety
precautions should always be followed, including the
following :
1. This unit is for surface or pendant mounting only. Do
not use in hazardous locations nor near gas or electric
heaters.
2. Do not use this equipment for other than the intended
use.
3. Install only in accordance with National Electrical Code
and local regulatory agencies' requirements.
Aperture
8-3/8"
LSRWM8B
8-3/8"
N otee: 12000 Lumen with DMX, and 9000 Lumen
D2W uses Cylinder for 15000 Lumen and above
INS #
Height Lumens
17-3/8˝ 1000-12,000
20-1/2˝ 15000 and above