Other Measuring Modes; Results - Orion Quikread Go Instrucciones De Uso

Other measuring modes

The instrument can be used in other measurement
modes besides its basic mode. The optional proto-
cols include use of a patient ID and/or an operator
ID, printing of the results, and sending of the results
to a laboratory information system (LIS). The mea-
surement protocol is specified in the settings menu,
where these features can be enabled or disabled.
Operator and patient IDs can be supplied via a bar-
code reader or entered with the instrument's virtual
keyboard or an external keyboard. The user supplies
the operator and patient IDs before the measure-
ment. Optionally, use of either or both types of ID
can be disabled in the configuration settings.
Also, the operator ID function can be configured to
propose the last input value. The user may change
the operator ID from the suggested value before
making a measurement, typing the new ID over the
previous, suggested one.
The measurement results can be sent to a printer
and/or to an LIS when printer and/or LIS transfer is
enabled.

Results

The results are stored in the Results file, from which
they can be viewed, printed, or transferred to USB
storage. The file's content is divided into the follow-
ing: the last results, the last quality-control results,
and the last LIS offline results.
LIS offline results are results stored in the memory
of a QuikRead go instrument that is normally con-
nected to an LIS but has temporarily been in LIS
offline mode.
Viewing results
To view the results, choose Results from the main
menu. You can select Last results, Last QC results,
or LIS offline results. The results can be scrolled with
the up and down buttons on the right.
The results can be sorted by time, analyte, or patient
ID by means of the corresponding buttons. Tapping
a result line gives detailed information on the indi-
vidual measurement in question.
Deleting result history
Choosing Delete result history permanently deletes
all results from the history file. The instrument will
ask for confirmation before deletion.
Printing results
Choosing Print gives an option of printing the re-
sults, sorted by date, analyte, or patient ID.
...
Tap the button, and select the results to be
printed. Choose OK to start printing.
Transferring results to USB storage
The results can be transferred to USB storage. Con-
nect a USB drive to a USB port. Choose Transfer to
USB, then select the results to be transferred and
choose OK. Do not remove the USB device until the
transfer is complete. After completion of the trans-
fer, the message "Transferring completed. You can
now safely remove the USB storage." will be shown.
Sending offline results to LIS/HIS
All results not yet sent to the LIS can be viewed via
LIS offline results. Choosing Send to LIS sends them
to the LIS, and the results are deleted from the LIS
offline memory after successful transfer. Choosing
Delete offline results deletes the results without
sending them to the LIS.
The QuikRead go instrument checks the LIS con-
nection automatically during start-up, when the
user enters the main menu, and after every mea-
surement. If a connection is available and there are
results in the LIS offline result history, the QuikRead
go instrument automatically proposes sending the
offline results to the LIS.
OPERATING INSTRUCTIONS 27