Seko POOL BASIC EVO DOUBLE Manual De Instalación página 7

Alarm
Level
OFA First Alarm (time >70%)
OFA Second Alarm (time =100%)
Flow Rate
System Error
Calibration Function
Default parameters:

Language = UK

Set Point value= 7,4 pH; 750 mV (Rx)

Dosing Method = Acid; Low (Rx)

Time OFA = OFF

Calibration = Full

Flow Input= OFF
Display
level____7,2_ph
ofa_alarm__7,2_ph
ofa_stop___7,2_ph
Flow_______7,2_ph
Parameter_error
Error_7_ph
Error_4_ph
Error_465_mv
To restore Default parameters run Following steps:





Relay
Alarm Relay Close - Push Enter Key to open
Alarm Relay open
Alarm Relay Close - Push Enter Key to reset
Alarm Relay open
Alarm Relay Open - Press Enter Key to replace
Alarm Relay open
Power off Pool Basic unit
Keeping Press UP and DOWN Key switch on the
Power.
Init.default__no
The unit will flash
Init.default__Yes
Press up
Enter Key to restore Default parameters.
Actions to do
Alarm Relay
- Restore Product tank
- Push Enter Key to reset
- Restore Flow Rate
Default parameter
- Destroy Unit
- Restore Probe or Buffer
solution and repeat
calibration function
6