Metra 99-8151 Instrucciones De Instalación

Lexus IS 300 2001-2005
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
KIT COMPONENTS
• A) Radio housing • B) Pocket trim plate • C) ISO DDIN trim plate • D) ISO DIN trim plate • E) Pocket
• F) Rear support bracket • G) Mounting brackets • H) Spacer brackets • I) ISO snap-in brackets
• J) (6) #8X3/8" Phillips truss head screws • K) (2) #8 x 3/8" Phillips pan head screws
A B
H
G
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • TYTO-01
Antenna Adapter: • Not required
METRA. The World's best kits.
Installation instructions for part 99-8151
99-8151
C D
I
™
E F
J K
metraonline.com
Table of Contents
Dash Disassembly ..................................................2
Kit Preparation
- DIN & ISO DIN radio provision with pocket ............ 3
- ISO DDIN radio provision ...................................... 4
Kit Assembly
- DIN radio provision with pocket ............................ 5
- ISO DIN radio provision with pocket ...................... 6
-
ISO DDIN radio provision ...................................... 7
TOOLS REQUIRED
• Phillips screwdriver • Panel removal tool • Cutting tool
• 10mm socket wrench
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION