Pima WRB Serie Instrucciones De Instalación

WRB
Installation Instructions
Инструкция по установке
Instrucciones de Instalación
‫הוראות התקנה‬
English, Русский, Español,
1
WRB
1
2
3
4
5
4
WRB Wireless Receiver
WRB is a FastLink technology wireless receiver that allows adding wireless capabilities to the FORCE Series intruder alarm systems.
The FastLink communication is encrypted using true, 128-bit AES encryption for high level of security.
The WRB can transfer signals from Visonic's
and RPB panic button, to the control panel, over the bus.
The WRB can alert on jamming, and has a back tamper switch.
For enrollment information, see the FORCE's Installation guide (P/N: 4410459).
Technical specifications
 Frequency (MHz):
WRB143: 433.92
o
WRB187: 868.95
o
 Wireless Zones/Key fobs Support:
o
FORCE
 Zones: 64, Key fobs: 64
o
FORCE Lite
 Zones: 24, Key fobs: 64
Content of the product package
 WRB Receiver + connector
Mounting guidelines
 Mount the WRB where the wireless signal is strong, and it can be connected to the bus.
 Do not mount the receiver inside a metal enclosure or on metalized wallpaper.
 Mount the receiver at least three meters away from any electrical device that generates noise.
 The receiver must not be exposed to direct heat sources, direct sunlight or strong artificial light.
 Contact with spraying or dripping water and aggressive liquids must be avoided.
1 www.visonic.com
‫עברית‬
1 Mounting Holes
2 Tamper Switch
3 ForceBus Terminals
4 Bus Cable
5 FORCE Control Panel
6 FORCE BUS Terminals
2
3
) ‫טמפר‬ (
ForceBus
‫לוח הבקרה של‬
FORCE
FORCE BUS
6
1 detectors and other peripherals (except remote controls), and PIMA's RMC remote control







 This guide
1 Монтажные отверстия
2 Монтажные отверстия
3 Тампер
4 Клеммная колодка ForceBus расширителя
5 Кабель шины BUS
6 Контрольная панель FORCE
‫ה‬ ‫קנ‬ ‫ת‬ ‫ה‬ ‫חורי‬ 1 1 Orificios de montaje
‫הגנה‬ ‫מפסק‬ 2 2 Interruptor contra sabotaje (Tamper)
‫חיבורי‬ 3 3 Terminales de conexión al ForceBus
Bus ‫כבל‬ 4 4 Cable de conexión al Bus
5 5 Panel de Control FORCE
‫חיבורי‬ 6
6 Terminales de conexión FORCE BUS
o
FORCE 32
 Zones: 24, Key fobs: 32
Operating Input Voltage: 9-14VDC
Current Consumption: 60mA
Sizes: 15 X 12 X 3 cm
Weight: 200gr
CE compliance
Operating Temperature: -10 to +50 °C
Humidity (Max.): 93% R.H., Non-condensing.
-1-