Test Strip - TRUE METRIX GO Guía De Prueba Rápida

Test Strip

Insert test strip into meter before touching
Sample Tip to blood or control solution
drop. Allow sample drop to be drawn into
the Sample Tip until dashes appear in the
Display.
~ Do not apply sample to top of test strip.
~ Do not smear or scrape drop with test
strip.
Caution!
DO NOT insert Sample Tip into meter. This
may damage meter.
Do not apply more sample to the test strip
after testing begins.
1
2
1. Contact End - Insert test strip into meter with
contacts (blocks) facing up.
2. Sample Tip - Bring Tip of test strip to top of sample
drop (blood or control solution) after Drop Symbol
appears in the Display.
12
Test Strip Vial Label
1. Lot Number (LOT) - Use for identification
when calling for assistance.
2. Expiration Dates (EXP)
3. Control Test Range - Range of numbers
where Control Test result must fall to
assure the system is working properly.
Caution!
Write date first opened on vial label. Discard vial and unused test strips if either the open vial expiration date
or the date printed next to EXP on vial label has passed, whichever comes first. See the test strip Instructions
for Use for open vial expiration date. Use of test strips past the Expiration Dates may give incorrect test results.
Discard out-of-date products and test with new products.
Ranges printed on test strip vial label are for Control Test results only and are not suggested levels for your
blood glucose.
1 LOT - ABC1234
2 EXP - 2018/10/31
{ 1 - 72-90 mg/dL
2 - 150-200 mg/dL
3
3 - 301-398 mg/dL
May 30, 2018
2
Test Strip Vial Label
(Example only and does not reflect
actual Control Test ranges)
13