To Save A Setup To Registration Memory; To Recall A Setup From Registration Memory - Casio CTK-4200 Guia Del Usuario

CTK4200_WK220_e.book 49 ページ ２０１１年４月１５日 金曜日 午前１０時１分
To save a setup to registration
memory
1. bo
Press (RHYTHM).
Bank number
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
3. bs
Press to select the bank you want.
bs
Each press of cycles through the bank numbers.
Bank 4
• You also can select a bank by holding down
br
use the (10-key) number buttons to enter a bank
number.
cn
4.
While holding down
cm
to to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
S t o r e
Stored in Setup 4-1
bs
as you
bt
, press a button from
Saving Keyboard Setups to Registration Memory
To recall a setup from registration
memory
1. bs
Press to select the bank that contains the
setup you want to recall.
Bank 6
2. bt cm
Use buttons to
setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
R e c a l l
Setup 6-1 recalled
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-18). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
See page E-62 for details about how to transfer sampled data
to a computer for storage.
to select the area whose
E-49