Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
•
Always use personal protection equipment, covering overall,
helmet with visor or protective goggles, gloves etc.
•
Beware of the risk of sparks if electric wires are cut off.
Always start the work by ensuring that the object is not
connected to any electric source.
Maintenance
To ensure correct operation of the tool it is important to carry out
regular maintenance. Carry out the following checks whenever
you finish using the tool.
•
Clean the tool.
•
Check that the pressure heads are undamaged. If the
pressure heads are chipped, replace them. The
pressure head will still work if it is chipped, but the
stress concentration that this causes could result in
failure of the pressure head next time it is used.
•
Check that the tool works satisfactorily in both directions. Run
the tool up to maximum pressure and check that there are no
oil leaks.
5
Publicidad
