Set-Up - Velux integra KLI 110 integra Manual De Instrucciones

Batteries
Insert batteries as shown.
a
Operation
Keys for operating the product
OPEN/UP or CLOSE/DOWN
Short key pressure: Product will travel to maximum top or bottom
position.
Long key pressure: Product will travel only until the key is released.
Note: If several electrical products are connected to a control unit
KLC 500, only one of the products (random) can be operated in this way.
b
Stop key
Product stops.
8 VELUX
®
- +
+
LED
+
-
+
KEY PRG
L R
b
a
L
L R

Set-up

On the back, the control keypad is equipped with two buttons L and R
and a light-emitting diode LED to be used during set-up.
If your VELUX INTEGRA product has not been set up with the control
®
keypad from factory, this must be done.
Do not fix the control keypad to the wall until set-up has been completed
and it has been verified that the products can be operated from the
proposed position.
LED
R
VELUX 9
®