LEGRAND LMTS-101-CCT Guia De Inicio Rapido

No: 25090 – 08/17 rev. 3
Catalog Numbers • Les Numéros de Catalogue • Los Números de Catálogo:
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
This unit is pre-set for Plug n' Go™ operation,
adjustment is optional.
For full operational details, adjustment and more features
of the product, see the DLM System Installation Guide
provided with Wattstopper room controllers, and also
available at www.legrand.us/wattstopper.
Installation shall be in accordance with all applicable
regulations, local and NEC codes. Wire connections
shall be rated suitable for the wire size (lead and building
wiring) employed.
For Class 2 DLM devices and device wiring: To be
connected to a Class 2 power source only. Do not reclassify
and install as Class 1, or Power and Lighting Wiring.
Do not apply cleaning solvent directly onto unit. Apply
cleaning solvent onto a cloth, then wipe the unit to clean it..
The LMTS-101-CCT provides daily control of Correlated Color Temperature (CCT) lighting fixtures of any CCT device within a single
DLM Network. Two types of event scheduling are available to control CCT:
Astro CCT event scheduling uses a location based Astronomical Clock entry, which determines Sunrise and Sunset times. A restricted
set of parameters allows the LMTS-101-CCT to make seasonal adjustments based on the astronomical settings. In Astro CCT mode,
only the CCT Target Level parameter can be modified.
Custom CCT event scheduling allows editing the default parameters for each event, including Start Time, Stop Time and a Target CCT Level.
MOUNTING
CAUTION: TO CONNECT A COMPUTER
TO THE DLM LOCAL NETWORK USE THE
LMCI-100. NEVER CONNECT THE DLM
LOCAL NETWORK TO AN ETHERNET
PORT – IT MAY DAMAGE COMPUTERS
AND OTHER CONNECTED EQUIPMENT.
Wattstopper
Correlated Color Temperature Low Voltage Timer Switch
Interrupteur faible tension pour la programmation de la température
de couleur corrélée
Interruptor con temporizador de bajo voltaje de Temperatura de
color correlacionada
Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido
DESCRIPTION AND OPERATION
The illustration below shows an examples of free-topology wiring. The LMTS-101-CCT
communicates with all other Digital Lighting Management devices connected to the low
voltage DLM Local Network, regardless of their position on the DLM Local Network.
LMSW-105-CCT LMTS-101-CCT
Preset Switch Schedule Switch
Daylighting Sensor
®
SPECIFICATIONS
Voltage .............................................................................. 24VDC
Current Consumption ...........................................................12mA
Power Supply ................................. Wattstopper Room Controller
Connection to the DLM Local Network .................... 2 RJ-45 ports
DLM Local Network characteristics when using LMRC-11x/2xx
room controllers:
Low voltage power provided over Cat 5e cable (LMRJ);
max current 800mA. Supports up to 64 load addresses,
48 communicating devices including up to 4 LMRC-10x
series and/or LMPL-101 controllers.
Free topology up to 1,000' max.
Environment ................................................. For Indoor Use Only
Operating Temperature .................32° to 131°F (0° to 55°C)
Storage Temperature ...................23° to 176°F (-5° to 80°C)
Relative Humidity .......................5 to 95% (non condensing)
Patent Pending
CONNECTIVITY
LMPB-100
LMRJ Cables
Occupancy
Sensor
NOTE: Each DLM local network must include a
DLM room controller, relay panel, or power booster
to supply low voltage power to the LMLM-101.
120/277VAC
Power
Booster
J-Box
LMFC-RJ
DLM Cable Connector
Red
Blue
Black
LMLM-101 Mounted on
Araya or Blanco Logic Module