FujiFilm EF-BP1 Owner's Manual

BL00004869-101
EF-BP1 EF-BP1
JA
バッテリーパック
EN
BATTERY PACK
FR
Batterie Pack
DE
Batterie-Pack
ZHS 电池组
ES
Contenedor de baterías
IT
Pacco batterie
RU
Батарейный блок
EN Owner's Manual
Thank you for your purchase of this BATTERY PACK for FUJIFILM fl ash
units. When used with compatible fl ash units, this product reduces
fl ash recycling time and allows the fl ash to be fi red more often be-
fore the batteries need to be replaced. Read these instructions be-
fore use and keep them in a safe place.
Parts of the EF-BP1 (Figure 1) Parts of the EF-BP1 (Figure 1)
A E
Power cable Battery holder
B Plug F Charging indicator
C Cover G Strap eyelet
D Latch release
Inserting Batteries Inserting Batteries
1 Remove the battery holder (Figure 2).
Keeping the latch release pressed, open the latch by sliding
the cover in the direction shown. Slide the battery holder from
the BATTERY PACK.
2 Insert batteries (Figure 3).
The EF-BP1 takes eight AA alkaline or nickle-metal hydride
(NiMH) batteries. Replace all batteries at the same time, using
fresh batteries of the same brand and type.
3 Re-insert the battery holder (Figure 4).
Slide the battery holder into the BATTERY PACK and close the
latch by sliding the cover in the direction shown.
Connecting the EF-BP1 Connecting the EF-BP1
1 Connect the power cable.
Plug the power cable securely into the fl ash unit's power con-
nector.
Turn the fl ash on.
2
The charging indicator lights green while the BATTERY PACK is
supplying power to the fl ash unit. Check that the fl ash ready
lamp on the fl ash unit lights red.
R The BATTERY PACK can be carried in the supplied soft case.
Precautions for Use Precautions for Use
Q The batteries in the fl ash unit are needed to charge the fl ash and
will lose their charge over time.
Q Firing the fl ash multiple times in succession may cause the
temperature of the BATTERY PACK to rise and the supply of
power to be temporarily suspended (in which case the charg-
ing indicator will stay green and the fl ash recycling time will
increase). The supply of power will resume automatically once
the BATTERY PACK cools.
• Electromagnetic interference from the BATTERY PACK may cause
noise in photographs. Keep the BATTERY PACK away from the
camera.
• Turn the fl ash off to reduce the drain on the batteries when the
product is not in use.
• Turn the fl ash off before connecting or disconnecting the power
cable.
• The batteries may become hot if the fl ash is fi red a number of
times in quick succession. Take all due precautions to avoid
burns or other injury when removing the batteries.
• High temperatures may damage the product. Do not leave it in an
enclosed vehicle or other locations subject to extreme temperatures.
Specifi cations Specifi cations
Product Product EF-BP1 BATTERY PACK
Dimensions Dimensions Approx. H161 mm × W71 mm × D23 mm/
(H × W × D) (H × W × D) 6.3 in. × 2.8 in. × 0.9 in. without coiled cord
Weight Weight Approx. 200 g/7.1 oz., excluding batteries
Operating temperature -10 °C to +40 °C/+14 °F to +104 °F Operating temperature
When Used with the EF-X500 When Used with the EF-X500
Number of uses Number of uses Recycling time Recycling time
Size, type, and number Size, type, and number
(approx.) (approx.) * * (approx.) (approx.) † †
AA NiMH × 8 AA NiMH × 8 350 350 1.5 s 1.5 s
AA alkaline × 8 AA alkaline × 8 260 260 2.8 s 2.8 s
* Number of times fl ash can be fi red at intervals of 30 seconds; count
ends when ready lamp takes over 30 seconds to light. Measured
using fresh batteries manufactured within last three months.
† Minimum time needed for ready lamp to light after fl ash fi res, as
measured under conditions described above.
For Your Safety
Be sure to read these notes before use
Safety Notes
• Make sure that you use your fl ash correctly. Read these safety notes
and your Owner's Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity
of the injury or damage that can result if the information indicated by the
icon is ignored and the product is used incorrectly as a result.
This icon indicates that death or serious injury can
WARNING
result if the information is ignored.
This icon indicates that personal injury or material
CAUTION
damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the instruc-
tions which are to be observed.
Triangular icons tell you that this information requires attention
("Important").