Testing Of The Appliance; Adjustment Information; Information About Replacing Parts - Angelo Po 04Wbmev Manual De Uso E Instalación

TESTING OF THE APPLIANCE

Important
Before it is put into service, the system
must be tested to check the operating con-
ditions of every single component and
identify any malfunctions. In this stage, it is
important to check that all health and safety
requirements have been complied with in
full.
To test the system, make the following checks.
1 - Check that the mains voltage is the same as
that of the appliance.

ADJUSTMENT INFORMATION

The appliance's main functions do not require any
special adjustments by specialist staff except the

INFORMATION ABOUT REPLACING PARTS

The appliance does not require the replacement of
operating components by specialist staff except the
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by skil-
led operatives in compliance with the legal
requirements with regard to safety at work.
Never dump non-biodegradable materials,
2 - Operate the appliance's circuit-breaker to che-
ck the electrical connection.
3 - Check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into ope-
ration in conditions of safety, in accordance with le-
gal requirements.
settings made during use by the user.
replacement of standard parts which can be carried
out by the user.
lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
- 15 -
8
9
IT
GB
DE
FR
ES
English