Hydraulic Systems; Combustion Supply - Riello Rg2 Instrucciones De Instalación, Uso Y Mantenimiento

4.11 Hydraulic systems

Explosion danger due to fuel leaks in the pres-
ence of a flammable source.
Precautions: avoid knocking, attrition, sparks and
heat.
Make sure the fuel interception tap is closed be-
fore performing any operation on the burner.
The fuel supply line must be installed by qualified
personnel, in compliance with current standards
and laws.
WARNING
It is necessary to install a filter on the fuel feed
line.
WARNING

4.11.1 Combustion supply

The burner is designed to allow entry of the flexible oil lines on
either side of the burner.
Depending on whether the pipe outlet is to the right or left of the
burner, it will be necessary to invert both the fixing plate 1) and
the closing bracket 2)(Fig. 17).
1
20136866
Installation
2 2
D5700
18 GB
1
1
Fig. 15